Livarno Z30503-BS - Manual (Page 12)

14 GB
Preparing for use / Use
 ATTENTION! When charging from a cigarette lighter socket, make
sure that the cigarette lighter socket adapter 13 is always fully in-
serted into your vehicle’s cigarette lighter socket. Failure to observe
this advice may result in overheating and consequent risk of fire.
Insert the mains adapter 14 into a mains socket or insert the ciga-
rette lighter socket adapter 13 into the cigarette lighter socket in
your vehicle. The charging indicator 9 lights up red to show that
the battery is being charged. The battery is fully charged as soon
as the charging indicator
9 lights up green
Note: The product is fitted with an overcharge protection circuit. In
spite of this, you should disconnect the light from the power supply after
the charging process is complete.
Use
 When using the light in a vehicle make sure that you do not endanger
the driver or the passengers. Store and secure the light in such a
way that, even under conditions of full braking, there is no danger
of damage to the product or personal injury.
Never point the LED beam on reflective areas, people or
animals. This can blind or irritate people and animals.
Even a LED beam of low power can cause damage to
the eye.
Note: The product has a hanger 2 , which can be used to suspend
the light. To do this, fold out the hanger 2 upwards (see Fig. C).
Do not pull on the light when it is hanging from the hook. The
hook could be torn out and the light damaged.
Note: The light also has a magnet 5 , which can be used to attach
the light to magnetic surfaces (see Fig. D). Make sure that the light
is not struck or knocked while it is attached to a magnetic surface.
56632_livx_LED-Arbeitsleuchte_Content_LB4.indd 14 29.12.10 13:18