Livarno 7226 - Manual (Page 9)

9 GB/IE
Changing … / Maintenance and Cleaning / Disposal / Warranty and Service
Q Changing the bulbs
CAUTION! DANGER OF ELECTRIC
SHOCK! When changing the bulbs,
first disconnect the light from the mains
supply. Remove its fuse or switch off the automatic
cutout in the fuse box (0 position).
j Allow the lamp to cool down completely.
j Remove the spring washer 3 from the lamp
housing 1 .
j Pull the defective bulb 2 with the socket 9
slightly out of the lamp housing 1 . Use a clean,
fluff-free cloth when you are replacing a bulb.
j Hold the socket 9 firmly and turn the bulb 2
¼-turn anticlockwise out of the socket 9 .
j Use only 230 V∼ bulbs with a GU10 socket
and a maximum power of 5 watts.
j Insert the new bulb 2 . Carefully insert it into
the socket 9 and turn it ¼-turn clockwise.
j Fix the bulb 2 in place in the lamp housing 1
with the spring washer 3 . Check that it is cor-
rectly seated (see Fig. D).
Q Maintenance and Cleaning
CAUTION! DANGER OF ELECTRIC
SHOCK! Before cleaning the lamp
make sure that it is isolated from the mains
supply. Remove its fuse or switch off the automatic
cutout in the fuse box (0 position).
CAUTION! DANGER OF ELECTRIC
SHOCK! For reasons of electrical safety,
the light must never be cleaned with water
or other fluids or be immersed in water.
J Do not use any solvents, petrol or similar. This
would cause damage to the light.
j Allow the lamp to cool down completely.
j When cleaning, only use a dry, lint-free cloth.
Q Disposal
The packaging and ancillary packing
consist entirely of environmentally-friendly
materials. They can be disposed of at
your local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the European
Union, the product has to be disposed
of in a separate refuse collection. This applies to
the product and to all components bearing this
symbol. Products marked in this way may not be
disposed of along with normal domestic waste but
have to be handed in at a recycling collection point
for electrical and electronic appliances. Recycling
helps to reduce the consumption of raw materials
and to ease the burden on the environment.
Warranty and Service
Warranty Declaration
This product has a 3-year warranty from the date of
purchase; the warranty is only valid for the original
purchaser and is not transferable. Please keep your
receipt as proof of purchase. The warranty applies
to material or manufacturing defects only. It does not
cover wear parts or damage caused by improper
use. The guarantee lapses in cases of unauthorized
tampering. Your statutory rights are not restricted in
any way by this warranty. Please contact the service
centre by telephone. In the event of any claims under
the warranty. This is the only way to ensure that your
instrument can be returned free of charge.
Service address
Briloner Leuchten GmbH
Im Kissen 2, 59929 Brilon, Germany
Phone: +49 (0) 29 61 / 97 12–0
Fax: +49 (0) 29 61 / 97 12–199
E-Mail: [email protected]
www.briloner.de