Livarno HALOGEN CEILING LIGHT - Manual (Page 30)

30 GB
Introduction / Safety
Halogen ceiling light
Introduction
Congratulations on the purchase of your
new device. You have selected a high
quality product. Carefully read these
operating instructions all the way through. Fold out
the page with the illustrations. These instructions
are part of the product and contain important infor-
mation on placing the product in service and on
how to handle the product. Always comply with all
safety instructions. Prior to placing the device in ser-
vice, check whether the correct voltage is present
and that all parts have been properly mounted.
Should you have any questions, or if you are uncer-
tain how to operate the device, please get in touch
with your dealer or service centre. Please keep these
instructions in a safe place and hand them on to a
third party if necessary.
Intended use
This luminaire is only suitable for indoor use, in dry
and enclosed rooms. The luminaire can be fastened
to all normally inflammable services. This device is
intended for use in private households only.
Scope of delivery
Immediately after unpacking, check that the scope
of delivery is complete and that the device is in
faultless condition.
1 Ceiling luminaire, model 3541-038L /
2010-038L (3-light)
3 halogen light bulbs, G9, 28 W
3 Lamp lenses
2 Dowels
2 Screws (ceiling installation)
2 Screws (connection housing)
1 Tool
1 Operating instructions
Parts description
1 Glass shade / wire mesh
2 Bulb
3 Spotlight head
4 Mounting bracket
5 Screws (connection housing)
6 Connection housing
7 Dowel
8 Screws (ceiling installation)
9 Screw terminal
10 Mains connection (external)
Technical Data
Operating voltage: 230–240 V ∼, 50 Hz
Bulb: halogen light bulbs,
220–240 V∼, 50 / 60 Hz,
G9, 28 W
Maximum rated power: 3 x 28 W
Energy efficiency class: C
Protection type:
IP20
Safety
Safety notes
Damages due to failure to comply with these oper-
ating instructions will void the guarantee! We assume
no liability for secondary failures! We assume no
liability for material damage or personal injury due
to improper handling or failure to comply with the
safety instructions!
Avoid danger to life from
electric shock
Ensure that a qualified electrician or a person
trained to carry out electrical installations per-
forms the electrical installation.
Always check the luminaire, the power supply,
and the mains cable for damage before plug-
ging it in. Never use the luminaire if it shows
any signs of damage.
Changing the bulb / Preparation / Prior to installation