Epson Bocs User Manual
Page 6
Welcome
6
What’s on the Front Panel?
1. Learning Window
Xtender has the ability to learn remote control codes
just in case you can’t find one in our remotes that
works. There is a simple procedure to follow in the
“Programming the Remote” section. This window is
where you point your remote control during that
process to allow Xtender to learn to control things
that are plugged into it.
2. Xtender Activity Lights
These lights flash when anyone in the home is
controlling an Xtender channel with a wireless
remote control. The Red light flashes when using the
Red channel, Green for green channel, and Blue for
blue channel. All of the lights glow when Xtender is
on, and they all flash together when you are pairing
a remote to Xtender.
3. Remote “Pair” Button
Each Xtender remote control must be paired to an
Xtender – this prevents your remotes from
controlling your neighbor’s Xtender as well as the
other way around. If you buy an extra remote or one
of your remotes needs to be re-paired, just press
this button then hold down the “Menu” and
“Channel +” buttons on the remote you would like to
pair.
1
2
3