Sealey FH2009 User Manual
Page 2
4. MAINTENANCE
3.1
Position heater where required on a level surface
ensuring that the air intake and outlet are not
obstructed in any way.
3.2
Plug the heater into the mains supply.
3.3
set the thermostat knob to the half way position as
shown in fig.1.
3.4
the selector switch has four positions which are
repeated on either side of the knob. see fig.1.
3.5
the fan heater will switch on when the selector switch
is set to one of the two power settings (1000W or 2000W).
3.6
once the room reaches the set temperature the
heater will switch on and off automatically to maintain
that temperature. Adjust the position of the thermostat
knob to obtain a comfortable room temperature.
3.7
If the fan fails to operate when a power setting is
selected the thermostatic temperature control may be
set too low. turn the knob slowly towards max until
the fan starts.
3.8
for a cooling effect turn the selector switch to the fan
only setting.
2. SPECIFICATIONS
tough metal casing with composite integral carry handle.
two-position heat settings control two 1000Watt heating
elements. full range ambient room thermostat maintains
temperature at pre-set level. fan doubles as cool air blower for
use in the summer. full ce approval. supplied with 13Amp
non-rewirable AstA approved plug.
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FH2009
Voltage/frequency:. . . . . . . . . . . . . . . . . . . . . . . . . 230V ~50Hz
Power rating:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000/2000W
Heat settings:. . . . . . . . . . . . . . . . . . . . . . . . . 1000W or 2000W
dimensions: . . . . . . . . . . . . . . . . . . . . . . . . . 200 x 258 x 95mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5kg
WARNING! Before attempting any maintenance ensure the unit is unplugged from the mains power supply and that it
is cool.
4.1. clean the heater with a soft dry cloth.
DO NOT use abrasives or solvents.
4.2. Periodically check the heater grille to ensure it is not blocked.
no other maintenance is necessary. If you experience a problem with your heater or if the power lead or plug is damaged
contact your local authorised service agent for repair.
DO NOT dismantle or tamper with the heater as this may be
dangerous and will invalidate your warranty.
3. OPERATION
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
wARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
fH2009.v2 Issue: 1 - 14/06/10
wARNING!
this appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety. children should be supervised
to ensure that they do not play with the appliance.