Environmental protection – Sealey SDH20 User Manual
Page 4
![background image](https://www.manualsdir.com/files/847690/content/doc004.png)
Before attempting any repairs, check the following:
Dehumidifier does not operate
Check if the plug is disconnected.
- Insert the plug into an electrical outlet fully and securely - check fuse in plug is OK.
Check if the water tank is full of water.
- Empty water out of the tank.
Check if the water tank is fitted properly in position.
- Fit the tank to the unit in it's correct position.
Check if all the air vents are closed
- Open one of the vents.
Dehumidified volume is small
Check to see if the filter is dirty.
- Clean or replace the filter as specified in 4.2. and 4.3. above.
Check to see if the air opening is blocked.
- Remove any obstacles from the air opening.
Check to see if the dehumidifier is in air clean mode.
- Change the operation mode to the dehumidifying mode.
Dehumidifier volume decreases when temperature is low. - The unit stops dehumidifying when the room temperature is below approx 5°C
.
Humidity in room has reached a low level.
- Dehumidifying stops because the humidity level is below 60% in "Automatic" mode.
Operation stops during spot dehumidifying
Room temperature is above the operating temperature.
- The dehumidifying operation will start automatically when the temperature drops to 35°C.
The humidity remains too high
The room size may be too large.
- Ideally unit should only be used in rooms with up to 30mtr² floor space.
Doors and windows may be being opened and
- Keep windows and doors shut during operation.
closed frequently.
The dehumidifier is used together with a kerosene
- Turn the heater off.
heater which emits water vapour.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
WARNING: DO NOT dispose of by fire. This could result in an explosion.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business
Park
, Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
SDH20.V3 Issue: 2(SP) - 17/02/14
4.4. Storage
4.4.1.
Unplug the unit, bundle the power cord, and hang the bundled cord at the back of the unit.
4.4.2.
Remove the water collection tank by sliding it out, and pour the water from it into a suitable container. Remove the tank cover and wash the
inside of the tank with clean water. The tank may be scratched if it is scrubbed strongly with a brush. Do not remove the float lever from the
tank. Wipe off the water on the outside of the tank with a cloth. Refit the tank cover onto the tank and replace the tank in position.
4.4.3.
Clean the air cleaning filters (see above).
4.4.4.
When the unit is to be stored for a long time, wipe the dehumidifier over with a dry soft cloth. To remove dirt, wipe over with a very slightly
dampened cloth (never use a wet cloth for cleaning the controls). To avoid deformation or cracking, do not use benzine, thinner or liquid
cleaners.
4.4.5.
When storing, place in a safe, dry, childproof location. Stand the unit upright and avoid exposure to direct sunlight.
© Jack Sealey Limited