Stealth mode time-out timer tone select – EFJohnson LTR-Net 002-9803-601 User Manual
Page 26

GENERAL FEATURES
26
Stealth Mode
The stealth mode disables the following tones and indicators so
that they do not reveal that you are transmitting or otherwise indicate 
your presence. The speaker audio and display remain enabled in this 
mode.
•
All tones (see “Tone Select” on page 26)
•
The front panel transmit/busy indicator (see page 11)
•
Display backlight
The stealth mode can be selected by the STEALTH menu
parameter (see page 33), or is fixed in the on or off mode by 
programming. There is no special indication that this mode is 
selected except that “On” is displayed under “STEALTH” when it is 
selected by the menu mode. 
Time-Out Timer
The time-out timer disables the transmitter if it is keyed contin-
uously for longer than the programmed time. It can be programmed 
for 0.5 - 5.0 minutes or disabled entirely. If the transmitter is keyed 
continuously for longer than the programmed time, the transmitter is 
disabled, “TIMEOUT” is indicated on the lower line of the display, 
and the intercept tone sounds. The timer and tone are reset by 
releasing the PTT switch. 
One use of the time-out timer feature is to prevent a repeater
from being kept busy for an extended period by an accidentally 
keyed transmitter. It can also prevent possible damage to the trans-
mitter caused by transmitting for an excessively long period.
Tone Select
If the TONES menu parameter is selectable, the tones that
sound can be selected. Otherwise, the tones that sound are fixed by 
programming. The following choices are available. Refer to page 33 
for more information on using the menu mode.
