EFJohnson LTR-Net 002-9803-601 - Manual (Page 23)

GENERAL FEATURES
23
HOME option switch if it is programmed. The Home system/group
is then displayed and it becomes the selected system/group. If no
home system/group or FCN or HOME option switch has been
programmed, this function is not available. A different home system/
group can be programmed for each bank.
Horn Alert
NOTE: The horn alert feature is not be available with some early
models.
If this feature has been installed by your system operator, it
activates an external alert such as the vehicle horn or lights when a
call is received on a group programmed for horn alert. When the
horn alert is enabled,
is displayed as shown in the following
illustration.
When enabled, the horn alert pulses on and off for 1-8 cycles
and then goes back to the disabled state. To change the currently
selected horn alert mode, the HRN ALRT menu parameter can be
used if available (see page 33).
The horn alert is programmed to operate in the manual or auto-
matic mode (see descriptions which follow). If the ignition switch
does not control transceiver power, only the front panel power
switch affects operation when applicable. Refer to “Power Turn-Off
Delay” on page 24 for more information.
Manual Off/On Mode
The horn alert mode does not change when power is turned on
and off by either the ignition switch or power switch. Therefore, the
horn alert is entirely controlled by the HRN ALRT menu parameter.
Horn Alert
Enabled