Epson STYLUS 7890 - Manual (Page 201)

201
Using the Optional Auto Take-Up Reel | 201
Winding Prints Forward
1. Tape the leading edge of the paper to the take-up reel core in three
places.
2. Press the d button to feed the paper forward and create some slack.
3. Set the Manual switch on the Auto Take-Up Reel to Forward and hold
it long enough to take up at least three turns of paper onto the reel.
Make sure adequate slack remains between the roll paper and the
take-up reel.
Note: When printing on
Singleweight Matte Paper
at least 24 inches wide,
place the tensioner in the
slack area to ensure good
print quality.