Epson 3250 - Manual (Page 2)

ActionPrinter 3250
Single sheets (Manual insertion):
Width 148 to 257 mm (5.8 to 10.1 inches)
92 lo 364 mm (3.6 to 14.3 inches)
Thickness 0.065 to 0.14 mm (0.0026 to 0.0055 inches)
weight 52 to 90 g/m 2 (14 to 24 lb)
Continuous paper:
Width 101 to 254 mm (4 to 10 inches)
Copies Two sheets (one original plus one copy)
Thickness 0.065 to 0.18 mm (0.0026 to 0.007l inches) total
Weight 52 to 82g/m 2 (14 to 22 lb) for one sheet
40 to 58g/m 2 (12 to 15 lb) per sheet in multi-part
forms
l Use only two-part carbonless multi-part forms and
use them only with the optional push tractor.
Note: You can use recycled paper under normal conditions. If you notice
increases in ribbon consumption and paper jamming, use a higher grade of
paper.
Continuous paper
Labels:
Size
Thickness
Weight
Envelopes:
Size No.6
No. 10
Thickness
101 to 254 mm (4 to 10 inches) width for backing
sheet
63.5 x 23.8 mm (2 1/2 x 1 5/16 inches) minimum for a
label
0.07 to 0.09 mm (0.0028 to 0.0035 inches) for backing
sheet
0.16 to 0.19 mm (0.0063 to 0.0075 inches) total
68 g/m
2 (17 lb)
Use continuous type labels only with the optional
push tractor.
l Use labels onIy under normal temperature and
humidity conditions.
166 x 92 mm (6.5 x 3.6 inches)
240 x 104
mm (9.4 x 4.1 inches)
0.16 to 0.48 mm (0.0063 to 0.0197 inches)
45 to 75g/m
2 (12 to 20 lb)
l Use envelopes only under normaI temperature
and humidity conditions.
l Load enveIopes with the longer side inserted into
the rear slot by manual insertion only.
Printable area:
Single sheets (paper cassette and
manual insertion) and envelopes
A
printable area
A The minimum lop margin is 8.5 mm (0.33 inches).
B The minimum left margin is
3
mm
(0.12
inches).
The minimum right margin is:
3.8
mm
(0.15
inches) for the A4-size paper cassette
9.7
mm (0.38 inches) for the letter-size paper cassette
3
mm (0.12 inches)
for
manual insertion
However, the maximum printable width is 203 mm (8 inches).
C The minimum bottom margin is
13.5
mm (0.53 inches).
A The minimum top and bottom margins above and below the perforation
are
9 mm (0.35 inches).
B The minimum left and right margins am 13 mm (0.51 inches).
The maximum printable width is 203 mm (6 inches).
Mechanical
Paper-feed methods:
MTBF:
Print head life:
Dimensions and weight:
Electrical
120 V model:
Bated voltage:
Input voltage range
Rated frequency range:
Input frequency range:
Rated current:
Power consumption:
Dielectric strength:
220-230 V model:
Rated voltage:
Input voltage range:
Rated frequency range:
Power consumption:
Dielectric strength:
240 v model:
Rated voltage:
Input voltage range:
Rated frequency range:
Input frequency range:
Rated current:
Power consumption:
Dielectric strength:
Friction (paper cassette and manual insertion)
Push tractor (optional)
Black ribbon cartridge S015032
Life expectancy : 2 million character at
48 dots/character
4000 power-on hours (10% duty)
100 million strokes/wire
Height 130 mm (5.1 inches)
Width 375 mm (14.8 inches)
Depth 252 mm (9.9 inches)
Weight 4.5 kg (10 lb)
AC l20 V
AC 103.5 to 132 V
50 to 60Hz
49.5 to 60.5 Hz
1.1 A
30 W (during self-test printing in draft mode at
10 cpi)
AC 1 kV rms, 1 second (betwem AC line and chassis)
AC220-230V
AC 198 to 244 V
50 to 60 Hz
49.5 to 60.5
Hz
0.6 A
30 W (during self-test printing in draft mode at
10 cpi)
AC 1.5 kV rms, 1 second (between AC line and
AC 240V
AC 216 to 264V
50 to 60 Hz
49.5 to 60.5 Hz
0.6 A
30 W (during self-test printing in draft mode at
AP-3250-2 3/17/92 24-Pin Printers