beautypg.com

How to use, Thermal cut off, Cleaner height setting – Eureka 4390 Series User Manual

Page 5

background image

Handle

Release

ON/OFF

4

3

2

5

Clean

Under

Use

Handle

Release 3

HOW TO USE

The upright vacuum cleaner design allows use on multiple types

of carpeting and on upholstery or bare floors with attachments.

When using the attachment tools, place the handle in the

upright position. Do not place cleaner on furniture or steps

as the brush roll may cause damage.
1. Adjust cleaner height setting knob to lowest position for

maximum cleaning. Adjust to a higher setting to make

pushing easier. For easy adjustments, tilt the cleaner back

to move the setting knob.

2. Plug electrical cord into outlet.
3. Step on handle release. Pull handle back to a comfortable

position.

4. Push On or Off power switch.

Store or

Use Attachments

Thermal Cut Off

This cleaner has a special thermostat that protects the

cleaner in case of motor overheating. If the cleaner

suddenly turns off, follow this procedure:

1. Push on/off pedal once.
2. Unplug cleaner.
3. Check for source of overheating problem (i.e. full bag,

clogged hose or clogged filter).

4. If a full bag, clogged hose or clogged filter is found,

replace the bag, unclog the hose or replace the filters.

5. Wait at least 30 minutes before attempting to reuse the

cleaner.

6. After 30 minute cool down period, plug the cleaner in and

push the switch pedal. The cleaner should turn on.

7. If the cleaner still does not operate, take it to any Eureka

Authorized Service Center for repair.

Cleaner Height Setting

WARNING: Avoid injury. Keep loose clothing, hair,

fingers, and all other parts of body

away from any moving part (such as

the revolving brush). Turn off the switch

and unplug the cleaner before changing

the cleaner height setting.

The front of the cleaner has an adjustment that raises or lowers

the cleaner base to match the type of carpet. With the cleaner

cord unplugged, set the adjustment to lowest setting for maximum

cleaning. If the cleaner is difficult to push, move adjustment to

next highest setting until cleaner is comfortable to push. The

brush roll must reach the carpet for effective cleaning.

NOTE: For ease in moving the adjustment knob, place

handle in operating position and tilt cleaner

back to remove weight from front wheels.

NOTE: When handle is in upright position, brush

roll is lifted off carpet. This is normal. Height

adjustment will not change brush roll level

until the cleanerʼs handle is moved into the

operating position.

LOW HIGH

1

This manual is related to the following products: