How to assemble, Continued) step b attach handle, Step c store hose and accessories – Eureka 4390 Series User Manual

Page 4: Step d store electrical cord, Step e check cyclonic cassette

HOW TO ASSEMBLE

(Continued)

Step B Attach Handle

CAUTION: Do not catch cord under handle.

3. From rear of cleaner, align handle with groove and slide

onto cleaner. If necessary, use thumb and finger pressure

to slide handle into position.

4. Once handle is in place, check that the hose adapter tab

is completely secure under the ledge of the handle.

5. Attach handle with two 5/8 inch screws in the assembly

packet. Use either a slotted or Phillips® head screwdriver.

Groove

Tab

Ledge

Step C Store Hose and Accessories

Combination

Tool

Crevice

Tool

Hook

Hose

Retainer

Tabs

Extension

Wand or

Wands

Carrying

Handle

HEPA Filter

(on some

models)

Step D Store Electrical Cord

NOTE: For easier access to bag compartment,

when you store the electrical cord use a

figure 8 pattern.

Make sure that the cyclonic cassette is fully seated in the

vacuum. Place thumbs on cyclonic cassette (marked by

arrows above) and push firmly.

NOTE: Do not lift cleaner by cassette handle, use

carrying handle on the back of cleaner.

Step E Check Cyclonic Cassette

This manual is related to the following products: