Elmo Micro Video Camera System SUV-CAM - Manual (Page 28)

108
This is convenient for quick start when the
camera direction adjustment or record
setting is not required.
Hold down [REC] to start recording.
When shooting an important scene, be sure to try
shooting beforehand and check the resolution,
the video quality and the frame rate to see
whether their settings are appropriate or not.
Do not turn OFF the power supply to the recorder
during recording, or the being recorded could be
corrupted and become unplayable.
Method (1): Method (2):
Press [REC] to stand by for the
recording. Press [REC] again to
start recording.
[REC] lighting
Recording
How to record
1
Turn ON the power supply. (ÎP105)
2
Start video recording.
The recorded data is saved automatically on the SD memory card.
Playlist screen
Record Standby
screen
Displays the camera
image. (For audio only,
the microphone is
displayed.)
Playlist screen
In the record standby state, it is
possible to adjust the camera
direction while watching the LCD
monitor or set the record by using
the OSD. (ÎP110)
(For audio only, such adjustment is
not required.)
Record screen
Starts recording.
[REC] blinking
[REC]
[REC]
Hold down [REC]