Emerson Radio CKT9100 - Manual (Page 9)

8
Low Battery Indication ( )
When the 9-Volt battery becomes weak, a low battery-warning indicator will
appear in the Caller ID display.
When you see this indicator you should replace the 9-Volt battery as soon as
possible. To avoid losing the numbers stored in the handset memory or the Caller
ID memory, leave the base unit connected to the AC outlet while you are changing
the battery.
Connecting The Telephone Cords
Line Cord
Unwind the straight telephone line cord. First connect one end of this cord to the
modular socket marked “LINE” on the back of the telephone base unit. Then connect
the other end of the cord to your telephone wall jack.
Push the modular plugs all the way in to the sockets until a ‘click’ is heard and the
cords are locked in place.
Note: If you have some other type of telephone jack, such as a 3-pin connector
jack, you will have to buy an appropriate modular to 3-pin connector plug,
available wherever telephone accessories are sold.
Telephone Wall Jack.
CKT9100_090606.p65 6/9/2006, 11:00 8