EverFocus ED560 - Manual (Page 39)

C H A P T E R 3 O S D M E N U A N D C O N F I G U R A T I O N
39
3.1.8.4 MOTION DETECTION
EZ550 enables you to observe movements of objects in 4 different places on the screen, the message
“MOTION DETECTED” appears on the screen when movement is detected; therefore this helps to
improve supervision efficiency. The camera detects an object’s movement by sensing discrepancy of
outline.
1) Please direct the arrow to point to “MOTION DET” by turning the mini-joystick UP
(c) or
DOWN (d).
2) Select “ON” by turning the mini-joystick LEFT (e) or RIGHT (f).
3) Press the mini-joystick.
z Please select the area you would like to detect from the 4 areas in AREA SEL mode.
z Please select ON mode for the chosen area.
MOTION DETECTION
> AEREA SEL AREA1
AREA STATE ON
TOP |+++++++++| 10
DOWN |+++++++++| 25
LEFT |+++++++++| 20
RIGHT |+++++++++| 40
Press SET to return
SPECIAL
CAMERA ID OFF
COLOR ADJ. <┘
> SYNC. LL <┘
MOTIION DET OFF
PRIVACY OFF
MIRROR OFF
SHARPNESS ON <┘
RESET
RETURN <┘
SPECIAL
CAMERA ID OFF
COLOR ADJ. <┘
SYNC. INT
> MOTIION DET ON <┘
PRIVACY OFF
MIRROR OFF
SHARPNESS ON <┘
RESET
RETURN <┘
SYNC
> PHASE |++++++++| 0