2 adjusting zoom and focus – EverFocus ED560 User Manual

Page 22

Text mode
Original mode

2.2.2 Adjusting Zoom and Focus

It is highly recommended to use Everfocus Test Monitor to test the camera. Find the second Video
testing connection at back panel. Connect it with video cable in the package.

1 .Loosen the zoom ring knob, and then turn the ring towards or as necessary to obtain the

desired view range.
W side (Zoom out)
The viewing range will be wider and the subject is smaller.
T side (Zoom in)
The viewing range will be smaller and the subject is larger.

2. Loosen the focus ring knob, then turn the ring towards <∞> or as necessary to obtain the

clear video image.

3. Repeat steps 1 and 2 until the best image is obtained. Once the lens setting is finished, tighten the

zoom ring and the focus ring knobs.

Power input

Video out

Connect with Test Monitor

C H A P T E R 2 I N S T A L L A T I O N