Resetting the lamp usage timer – Epson 810 User Manual

Page 52

Maintenance

8. Gently insert the new lamp and tighten its screws.

Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result
in premature lamp failure.

9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.)

10. Reset the lamp usage timer, as described below.

Resetting the Lamp Usage Timer

After replacing the lamp, plug the projector back in, turn on the power switch on the back,
and press the P

Power

button. Then follow these steps to reset the lamp usage timer:

1. Press the

button on the projector or remote control.

2. Use the menu navigation buttons to open the

Reset

menu, then select

Reset Lamp

Hours

3. When you see a confirmation prompt, highlight

Yes

and press the

Select

button.

4. When you’re finished, press the

button to exit.

The lamp usage timer doesn’t register until you’ve used the lamp for at least 10 hours.

PowerLite Cinema Pro 810.book Page 52 Thursday, December 6, 2007 11:25 AM