Electrolux Wave-Touch 137018100 A - Manual (Page 10)

10 Operating Instructions
5. Start the cycle.
Close the door and press
start to begin the
cycle. The dryer will not operate with the door
open. To interrupt the cycle, press
pause or
simply open the door. Press start again to re-
sume the cycle. Press cancel to stop the cycle.
To change the cycle once the cycle has begun,
press
cancel, select a new cycle, and restart
the dryer
To change the
temperature, dryness level or
drying time, extended tumble time or options
once the cycle has begun, press
pause, make
the new selections and restart dryer.
A signal will sound at the end of the cycle,
periodically during
extended tumble and
wrinkle release, when the damp alert option
is selected and to notify you that the load has
finished.
When the cycle ends,
COMPLETE will be
displayed and the drum light will come on.
Remove the items promptly and hang or fold.
OPERATING YOUR DRYER, con’t
IMPORTANT
Clean the lint filter after every load. CLEAN
FILTER will be displayed at the end of the cycle
to remind you to remove lint from the filter.