Echo PPT-2100 - Manual (Page 4)

4
DECALS
Locate this safety decal on your unit. The complete unit illustration found in the "DESCRIPTION" section, will help you
locate them. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal
cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific
information.
EQUIPMENT
Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten
and/or replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks.
DO NOT operate unit if leaks are found.
• Never adjust the guide bar or saw chain when the engine is operat-
ing.
Engine Cover
INTERNATIONAL SYMBOLS
Symbol
description/application Symbol form/shape
Symbol
description/application Symbol form/shape
Hot
Surface
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Symbol
description/application Symbol form/shape
Symbol
description/application Symbol form/shape
Read and understand
owners manual.
Wear eyes, ears and
head protection
Emergency stop
Fuel and oil mixture
Finger Severing
Carburetor adjustment
- Low speed mixture
Safety/Alert
Avoid all power lines.
This unit is not insu-
lated against electri-
cal current. Do not operate closer
than 15 M (50 ft.)
from electrical
hazards.
Keep bystanders at
least 15 meters
(50 feet) away.
Plan retreat path
from falling
objects. Wear hand protec-
tion. Use two handed. DO NOT smoke
near fuel.
DO NOT allow
flames or sparks
near fuel.
15 M
Wear slip resistant
foot wear.
15 M
!
Engine choke
control.
Ignition
I O
Ignition
ON/OFF
Chain lubrication
ON OFF
Primer bulb