Crivit PZ-2116 - Manual (Page 4)

6 GB/IE
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following assembly instructions. Use the product
only as described and only for the given areas
of application. Keep these instructions safe.
When passing the product on to a third party,
always make sure that the documentation is
included.
Scope of Delivery (figure A)
1 x Bag (1)
1 x Pop-up tent (2)
9 x Tent pegs (3)
5 x Guy-ropes (4)
1 x Assembly instructions
Technical data
Tent roof: hydrostatic head: 3000mm;
side walls/floor: hydrostatic head: 1500mm
Dimensions set up:
approx. 148 x 107 x 240cm (W x H x D)
Category: Category A camping tent (Light-
weight)
Performance level: 1 – tent designed for infre-
quent use for short periods.
For occasional summer weekend camping in
mainly fine weather.
Intended use
This product serves as an outdoor sleeping and
living space. The product is not designed for use
in snow or storms.
Safety instructions
PLEASE READ THE ASSEMBLY
INSTRUCTIONS BEFORE USE!
PLEASE KEEP THE ASSEMBLY
INSTRUCTIONS IN A SAFE PLACE!
CAUTION! RISK OF INJURY!
Please ensure that all parts are undamaged and
are assembled correctly. There is a risk of injury
if it is not assembled correctly. Damaged parts
can impair safety and function.
CAUTION! Never leave children unsu-
pervised! The product is not a climbing frame or
a toy! Please ensure that nobody, particularly
children, climbs or leans on the product.
The product could become unstable and tip
over. Injuries and/or damage could result.
CAUTION! RISK OF INJURY!
Never assemble or dismantle the product in
strong wind.
• Choose the most stable, level surface possible
as a location.
• Sandy surfaces reduce stability. Ensure that
you use a surface that offers a strong hold for
the tent pegs.
• Never hit the tent pegs into the ground with
force! Lengthen the guy-ropes with the help
of a loop and place the tent pegs at a dif-
ferent location.
• Carry out regular checks on the integrity of
the connection points and check the guy-ropes
and that the tent pegs are secure.
• An incorrect assembly sequence could cause
damage to the tent. Any liability is excluded.
CAUTION! RISK OF POISONING
AND RISK OF DAMAGE TO
PROPERTY!
Do not light fires inside the product and keep it
away from heat sources.
• Precautionary measures against fire can be
found on a sewn-in label inside the tent.
We recommend that you do not remove this
label.