Electrolux U02108 EOD 982 - Manual (Page 16)

AUTOMATIC CONTROL
Important:
You can only use the automatic control for
the main oven.
When you use the automatic controls for the first time
it's probably best to choose a time when you are at
home. That way you can check to make sure you've set
everything correctly and you'll feel much more confident
when you are away from home in the future.
SETTING THE CONTROLS FOR
AUTOMATIC USE
This is very easy. All you have to do is work through the
steps below. The clock will work out the rest for itself.
1 Is the electricity supply on?
2 Is the clock
showing the
correct time? To adjust turn the selector knob
to 'Manual' then turn to 'Time
Setting'. Turn the setting knob in
either direction.
3 How long will
the food take
to cook? Turn the selector knob to 'Cook
Time'. Then turn the setting
knob until the length of time you
want the food to cook shows in
the display. The maximum
cooking time is 10 hours. 'Auto'
will show in the display.
4 What time do
you want the
food to be
cooked by? Turn the selector knob to 'End
time'. Turn the setting knob until
the time the oven is to switch off
shows in the display. The
cookpot ( ) will go out.
The 'End time' must not be more
than 23 hours 59 minutes from
the time of day. For example if
the time of day is 9.00 am the
latest 'End time' will be 8.59 am
the next day.
5 Set to
automatic. Turn the selector knob to
'Automatic'.
6 Turn on the
oven control. Turn the oven control to the
required temperature.
The time shown on the right gives an example of setting
the automatic controls when the time is 9.00 am, the
food is to be cooked for 2½ hours and the food is
needed at 6.00 pm (1800 hours).
The clock will work out what time the oven will switch
itself on and it will turn the oven off at the end. Once the
automatic sequence is finished there will be an alarm to
remind you that you need to set the oven for manual
operation. To do this turn the selector knob to 'manual'.
Turn off the oven control.
If you change your mind and want to cancel a
programme that you have set simply turn to 'time
setting' and then to 'manual'.
16