Use first use, Daily use – Electrolux EWN 14991 W User Manual
Page 9
use electrolux 9
Use
First Use
●
Ensure that the electrical and water
connections comply with the
installation instructions.
●
Remove the polystryrene block and
any material from the drum.
●
Run a cotton cycle at 95°C, without
any laundry in the machine, to
remove any manufacturing residue
from the drum and tub.
Setting the language
When switching on the appliance for the
first time, by turning the programme
selector dial, you must set the language in
which you want the indicators in the
display to appear. When the appliance is
switched on again all indicators in the
display will appear in this language.
Important!
If the display is not showing any language,
the appliance has already been switched
on once. In such case, if you would
change the language setting, press at the
same time Temp. and Spin buttons for 6
seconds to activate the menu language.
By pressing the
Option buttons
you can scroll all the available languages.
Press the Ok button twice to confirm your
choice.
Setting the time
After having chosen the language you
must set the time prior to the first wash
and when changing to and from daylight
savings time.
The clock setting permits you to
modify/set up the current time. It is
important to keep it updated as the
current END Cycle Time depends on it.
With a short/single time pressure of the
Option
buttons, the time varies
minute by minute. With a continue
pressure of the same buttons, the time
varies 10 minutes by 10 minutes.
Press the Ok button to fix the current time.
Daily Use
Customize your appliance
This appliance is provided of a «settings»
menu that allows you to modify the
factory settings as you want.
When you switch on the machine, by
turning the programme selector dial,
press the Option
buttons to
activate the Options menu. By pressing
again the same buttons you can move
through all the available options till when
you locate the Settings menu. Press
Ok to access in the menu. Use again
Option
buttons to scroll all the
settings and press Ok button to confirm
your choice.
Setting the sound volume
The sound setting permits you to modify
the volume of the sound emitter. By
pressing the Option
buttons,
you can choose between different
volume levels from
0
to
9
(
0
=
no sound;
9
=
max.).
Press Ok button to confirm your choice.
Setting the brightness
The Brightness setting allows you to
modify the backlight intensity of the
display.
By pressing the Option
buttons,
you can increase or decrease the
brightness.
132972250 EN.qxd 13/04/2007 14.12 Pagina 9