Electrolux EWN 14991 W - Manual (Page 13)

use electrolux 13
The duration is calculated automatically
on the basis of the maximum
recommended load for each type of
fabric.
After the programme has started, the
time remaining is updated every minute.
Programme progress display
After you have pressed the Start/Pause
button, the display of the the machine
shows which phase of the programme
wash is performing.
On the display you can see the symbol
of the selected type of fabric, the
current phase, the duration of the wash
programme and the end of cycle.
When the machine performs the
washing phase the display shows also
some animated bubbles that simulate
the moving of the water.
1:37
20:33
Washing
Temp. Spin Option Ok
Time
manager
Start/
Pause
2:00
20:33
Filling
Start/
Pause
Temp. Spin Option Ok
Time
manager
1400 60
0 2:00
20:33
A
B
Start/
Pause
Temp. Spin Option Ok
Time
manager
Delay
The selected delay time value (up to 20
hours max.) appears on the right side of
the display close to the relevant icon
that it is lighted-on.
The delay time value decreases every
minute.
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example «Cannot fill water. Please
check that the tap is open and then
press » (please see paragraph
“Something not working”).
Delay Start
23:00
1:29
Temp. Spin Option Ok
Time
manager
Start/
Pause
0:20
20:33
Spinning
Temp. Spin Option Ok
Time
manager
Start/
Pause
0:40
20:33
Draining
Temp. Spin Option Ok
Time
manager
Start/
Pause
0:59
20:33
Rinsing
Temp. Spin Option Ok
Time
manager
Start/
Pause
132972250 EN.qxd 13/04/2007 14.12 Pagina 13