Electrolux EWN 14991 W - Manual (Page 20)

20 electrolux use
Select the Start/Pause
To start the selected programme, press
the Start/Pause button; the green
pilot light stops flashing.
On the display will appear the icon,
and alternatively the name and the
running phase of the selected
programme to indicate that the
appliance starts operating and the door
is locked.
02:00
20:33
Filling
Temp. Spin Option Ok
Time
manager
Start/
Pause
To interrupt a programme which is
running, depress the Start/Pause
button: the green pilot light starts to
flash and the icon and the current
phase of the selected programme
appears on the display to indicate that
the appliance is paused.
To restart the programme from the
point at which it was interrupted,
press the Start/Pause button again.
If you have chosen a delayed start, the
machine will begin the countdown.
Altering an option or a running
programme
It is possible to change only the
options vizualised on the display by
means of
and buttons before
the programme carries them out.
Before you make any change, you
must pause the washing machine by
pressing the Start/Pause button.
Changing a running programme is
possible only by resetting it. Turn the
programme selector dial to “O” and
then to the new programme position,
press the Ok button to cancel the
previous washing programme. The
washing water in the tub will not
emptied out. Start the new programme
by depressing the Start/Pause button
again.
Interrupting a programme
Depress the Start/Pause button to
interrupt a programme which is
running, the corresponding light starts
to flash. Depress the button again to
restart the programme.
Fabric Soil Level
Cottons
95°C X X X X X X
60/50°C X X X X X X
40°C X X X X X X
30°C X X X X X X
(cold) X X X X X X
Synthetics
Delicates
60/50°C X X X X
40°C X X X X
40°C X X X X
30°C X X X X
30°C X X X X
(cold) X X X X
(cold) X X X X
132972250 EN.qxd 13/04/2007 14.13 Pagina 20