Getting started, Timers, Setting clock at power up – Electrolux 316471400 User Manual
Page 11
11
Timers
Getting Started
Setting clock at power up
You will be prompted to enter the time of day in the
event of a
power failure or when you first provide
electric power to your appliance.
• When your appliance is first powered up, 12:00
will flash in the display.
• Enter the time of day using the numeric key
pads and press
START to set.
If an invalid time of day is entered, the control will
triple beep. Re-enter a valid time of day and
press
START. If CANCEL is pressed your clock
will start with the time set for
12:00.
Select the user pref key to modify the time of day
during other situations such as day light savings.
See example below to set the timer for 5 minutes:
Example
Step
Press
3. Press
TIMER
1. Press
TIMER
2. Enter
5 minutes
NOTE
The timer(s) will not affect the cooking process.
The two timers provided with the oven control
serve as extra reminders in the kitchen. When a
timer reaches less than 1 minute the display will
start to count down in seconds. When the time
runs out the active timer will beep, “
00:00” will
display and the timer key will flash.
The following time settings apply to the timers:
• Min. time: 1 minute
• Max. time: 11 hours 59 minutes
To cancel after setting the timer, press the
TIMER
key again.