Excell Precision FM - Manual (Page 34)

EXCELL PRECISION CO., LTD .
FM User Manual SME300000119 33
2 Command Mode
Command Function Command Function
READ, RW Weight Reading CT Tare Clearing
ZERO, MZ Weight Re-zeroing Rl Weight Accumulation
TARE, MT Gross Weight Reducing Rm Times Accumulation
NTGS Gross / Net Switch Rn Date
MG Gross Weight Indicating Ro Time
MN Net Weight Indicating AT
Weight and Times
Accumulation
DT
Weight and Times
Accumulation Clearing
Œ After setting the commands mentioned above, it ’s necessary to add the termination
code
“CR(0DH) and LF(0AH)”.
• If the command is not correct, it will reply “E” + “Command Unidentified”.
Ž If setting command mode with address (RS1-06 = 4), add “@ address” in front of each
command.
Example: When RS1-08 = 1, for reading weight value, the whole complete command
should be
“@01RW(CR)(LF)”.