Epson 1250 - Manual (Page 29)

25
Problem Solving
This chapter gives you the basics for diagnosing and solving scanner problems. For
more troubleshooting tips, see the “Troubleshooting” section of your electronic
Reference Guide.
Scanner Light
The
] light indicates the status of the scanner, as described in the tables below.
EPSON Perfection 1250/1250 PHOTO
Light Color Status
Flashing Green The scanner is initializing (warming up) or is busy scanning.
On Green The scanner is ready to scan images.
On Red The scanner may not be properly connected to the computer.
Unplug the scanner from its power source, remove the USB
cable, and then plug them back in.
If this does not eliminate the error, one of the following may be
the problem and you need to consult your dealer or EPSON:
■ The fluorescent lamp needs to be replaced.
■ The scanner is malfunctioning.
Off — The scanner or AC adapter is unplugged.
basics.book Page 25 Monday, July 16, 2001 4:11 PM