Ericsson T18d - Manual (Page 26)

Not for commercial use – Ericsson Inc.
22 Basic Operations
Turning Your Phone On and Off
After you have installed a fully charged battery in your
phone, turn your phone On by pressing and holding
NO
until your phone sounds a beep.
Note! If you have the vibrate option activated, the phone will
also briefly vibrate.
To turn your phone Off, press and hold NO until your
phone sounds a beep and turns off.
Setting the Display Language
You can set the language used to display the menus for
your mobile phone.
To change the display language:
1 Turn your phone On.
2 Press or from the Standby screen to access the
main menu.
3 Press 4 to display the SETTINGS menu.
4 Press 5 to display the Language submenu.
5 Press the or repeatedly until the appropriate
language option is highlighted. The language
options are American English, Canadian French,
Latin American Spanish, Brazilian Portuguese, and
Hebrew.
Note! The available languages may vary by region.
6 Press YES to select the language.
Selection Stored! appears in the display.
7 Press NO to return to the previous screen.
8 Press CLR to return to the Standby screen.
Setting the Ring Sound
To select the ring sound for your mobile phone:
1 Turn your phone On.
2 Press or from the Standby screen to access the
main menu.
3 Press 5 to display the SOUNDS Menu.
4 Press 2 to display the Ring Sound submenu.
5 Ring Sound appears in the display.
6 Press the or repeatedly until the appropriate
ring sound is highlighted. You will hear two ring
cycles of the each ring sound as you scroll through
the list of ring sounds.
or 4 5
or 5 2