Ericsson T18d - Manual (Page 27)

Not for commercial use – Ericsson Inc.
Basic Operations 23
7 When the appropriate ring sound is highlighted,
press
YES . Selection Stored! appears in the
display.
8 Press NO to return to the previous screen.
9 Press CLR to return to the Standby screen.
Setting the Ring Volume
To select the ring volume for your mobile phone:
1 Turn your phone On.
2 Press or from the Standby screen to access the
main menu.
3 Press 5 to display the SOUNDS Menu.
4 Press 3 to display the Ring Volume submenu.
5 Ring Volume appears in the display.
6 Press the or repeatedly until the appropriate
ring volume is highlighted. You will hear two ring
cycles of the currently selected ring sound as you
scroll each volume selection.
7 When the appropriate ring volume is highlighted,
press
YES . Selection Stored! appears in the
display.
8 Press NO to return to the previous screen.
9 Press CLR to return to the Standby screen.
Making a Call
1 Enter the phone number you want to call by press-
ing the numeric keys. The phone number is shown
in the display.
Note! You can press CLR to erase one or more digits in the dis-
play, or press and hold CLR to erase all digits.
2 Press YES . Connecting is shown in the display
while your phone accesses the mobile network.
3 When the call is connected, In Use will display on
your screen and your call timer will indicate the
duration of your call. The phone number that you
dialed will remain on your screen.
4 When you finish your conversation, press NO or
close the flip to end the call.
Auto Retry
If you try to place a call and the mobile network is not
available, your phone automatically redials the phone
number every 15 seconds for three minutes if the Auto
Retry feature is enabled. See the section on Auto Retry
in the “Menu Descriptions” chapter.
or 5 3