Ericsson T18d - Manual (Page 21)

Not for commercial use – Ericsson Inc.
Learning About Your Mobile Phone 17
Phone Display Icons and Display Indicators
Phone Display Icons
The following icons are used to display the status of your
phone:
1 Voice Mail Waiting Icon
2 New Text Mail Icon
3 Keypad Locked Icon
4 Ringer Silent Icon
5 Active Profile Icon
6 Battery Icon
7 Digital/Analog Channel Indicator
8 Signal Strength Icon
Display Indicators
1 Voice Mail Waiting Icon indicates the number of
voice mail messages that have not been heard.
2 New Text Mail Icon indicates the number of text
messages that have not been read.
3 Keypad Locked Icon indicates that pressing the
keys on the keypad has no effect. This eliminates the
possibility of accidentally pressing keys.
4 Ringer Silent Icon indicates that your phone will
not make any keypad or ringing sounds. If activated,
the vibrator will continue to operate.
5 Active Prof ile Icon shows if a user-customizable
profile has been activated (Normal, Data/Fax,
Handsfree, Meeting, Weekend, or Travel). Profiles
are used to turn on/off certain phone settings to suit
a particular environment.
6 Battery Icon shows the relative strength of your
battery. A full icon indicates a fully-charged battery.
If the phone is connected to external power and the
battery is charging, the display will alternate
between the battery icon (
) and the external
power icon ( ).
7 Digital/Analog Channel Indicator shows whether
the phone is currently operating in digital or analog
mode.
8 Signal Strength Icon shows the relative signal
strength from the mobile system. More bars indicate
a stronger signal.
Indicator Light Functions
The color and state of the indicator light on top of your
phone indicates the following conditions:
• Slow Flashing Green: Phone is in standby mode.
• Rapid Flashing Green: Phone is receiving a call.
• Steady Green: Phone is receiving power from an
external source, such as a travel charger.
• Flashing Red: Low battery power alert.
• Flashing Orange: Phone is in standby mode, and
the vibrate alert is set to Vibrate Only.
1 2 3 4 5
6 7 8