Enlight EN-898X - Manual (Page 26)

26
3. ID Select（2 ID group）
S1 off 0-5
S1 on 8-13
4. The Back Plane LED
SAF-TE control the red LED will be blinking
HDD the green LED will be blinking
Power Both red and green LED will be blinking
Visual Indicators
The GEM318 controls status indicator lights for up to eight
device slots. Table 3-13 describes the states that are displayed.
Table 3-13.Visual Indicator State
Device Status Indicator Light
No Error
Faulty or rebuild stopped
Rebuild
Identify
Off
Steady on
Slow blink(~1/sec)
Fast blink(~3/sec)
The identify LED can be flashed with or without a drive inserted
in the slot. Consequently, the identify LED indicates which slot
is housing the faulty device and shows the user in which slot a
replacement drive should be installed.