Emerson Radio HD8003 - Manual (Page 20)

1 9
RECALLING PRESET STATION
1.) Turn the radio ‘On’ and press the ASP/BAND button to select the desired
band.
2.) Press the PRESET UP or PRESET DOWN buttons to scroll through the preset
numbers.
3.) You may also press one of the direct preset number keys (1 – 5) to go directly
to a desired preset station number. For preset numbers 1 through 5 press the
corresponding number key. For preset numbers 6 through 10 press the “M5+”
button first followed by the corresponding preset number key. For example to
select preset number 6 press the “M5+” button followed by the number 1 button.
CHANGING A PRESET STATION
To change a preset station simply tune to the new station that you wish to memorize,
press the PROG/MEMORY button, and then select the number of the memory you
wish to change by pressing the PRESET UP or PRESET DOWN buttons. When
the desired preset number appears in the display press the PROG/MEMORY button
once more to enter the new station in the desired preset memory number. The
previously memorized station will be deleted from the memory.
ANTENNA INFORMATION
FM
The headphone wire serves as the FM antenna. Keep the headphone wire extended
to its full length for best FM reception.
AM
The AM bar antenna is located inside the cabinet. If AM reception is unsatisfactory
try rotating the entire unit slightly until you find the position that provides the best
reception.
HD8003_ib040403.p65 4/4/2003, 14:17 19