Eiki LC-SD12 - Manual (Page 26)

26
Computer Input
Note:
Display area, Display area (H/V) and Full screen cannot be adjusted when
480p, 575p, 480i, 575i, 720i(HDTV) , 1035i(HDTV) or 1080i(HDTV) is selected
on PC SYSTEM Menu. (
☞
P23 ).
Select area displayed with this projector. Select the resolution at the
Display area dialog box.
Display area
Adjust the horizontal area displayed with this projector. Press the
Point
7 8 buttons to decrease/increase value to match the
resolution of image. Then press the SELECT button.
Display area H
Adjust the vertical area displayed with this projector. Press the Point
7 8 buttons to decrease / increase the value to match the resolution
of the image. Then press the SELECT button.
Display area V
Press the Point 7 8 buttons to switch Full screen function to “On”
or “Off.” Set “On” to resize the image with 4 x 3 aspect ratio to fit
the screen.
Full screen
Reset
Store
Close PC Adjust Menu.
Quit
To store adjustment parameters, move the red frame pointer to the
Store icon and then press the SELECT button. Move the red arrow
pointer to any of Mode 1 to 5 that you want to store to and then
press the SELECT button.
Reset all adjust parameters on adjustment dialog box to previous
figures.
Mode free
Vacant Mode
Close this dialog box.
To store adjustment data
To clear adjustment data
To clear adjustment parameters previously set, move the red frame
pointer to the Mode free icon and then the SELECT button. Move
the red arrow pointer to the Mode that you want to clear and then
press the SELECT button.
Press the SELECT button at the
Display area icon to show the
Display area dialog box.
Display area
This Mode has parameters being stored.
Shows values of “Total
dots,” “Horizontal,”
“Vertical,” “Display area H,”
and “Display area V.”