Epson GT-15000 - Manual (Page 2)

EPSON GT-15000
2 - EPSON GT-15000 12/03
Digital halftoning AAS (Auto Area Segmentation,
enable/disable selectable)
3 error diffusion modes (A, B, and C)
4 dither patterns (A, B, C, and D) for
bi-level and quad-level data
(2 downloadable dither patterns)
Gamma
correction
2 types for CRT display
3 types for printer
1 type user-defined
Color correction 1 type for CRT display
3 types for printer (available in color
byte sequence mode and color line sequence
mode)
1 type user-defined
Interfaces SCSI 2 (half pitch 50-pin connectors)
USB 2.0 (Type B receptacle connector)
IEEE 1394 (FireWire), optional
10Base-T/100Base-TX, optional
Light source Xenon gas cold cathode fluorescent lamp
Reliability 100,000 cycles of carriage movement
(main unit MCBF)
Dimensions Width: 25.8 inches (656 mm)
Depth: 18.0 inches (458 mm)
Height: 6.2 inches (158 mm)
Weight Approximately 29.8 lb (13.5 kg)
Electrical
Input voltage
range +10%)
100 to 120 VAC
220 to 240 VAC
Rated frequency 50 to 60 Hz
Rated current 100 to 120 VAC: 0.8 A
220 to 240 VAC: 0.3 A
Power
consumption
Operating: approximately 50 W
(75 W with ADF unit)
Standby: approximately 7.5 W
Environmental
Temperature Operating: 41 to 95 °F (5 to 35 °C)
Storage: –13 to 140 °F (–25 to 60 °C)
Humidity (without condensation)
Operating: 10 to 80%
Storage: 10 to 85%
Operating
conditions
Ordinary office or home conditions. Avoid
dust, direct sunlight, and proximity to
strong light sources.
Safety Approvals
120 V model
Safety: UL 1950
CSA C22.2 No. 950
EN 60950
EMC: FCC part 15 subpart B class B
CSA C108.8 class B
EN 55022 (CISPR Pub 22) class B
AS/NZS 3548 class B
CNS 13438 class B
230 V model
Safety: EN 60950
EMC: EN 55022 class B,
EN 55024, EN 61000-3-2, 3-3
SCSI Interface
Interface type ANSI X3T9.2/375R Revision 10L (SCSI 2)
Logic level TTL-compatible
ID setting Selectable from 0 to 7
Terminator Internal terminator (enable/disable
selectable)
Connector type Two half pitch 50-pin connectors
USB Interface
Interface type Universal Serial Bus Specification, Rev. 2.0
Electrical standard Full speed mode (12Mb) and High speed
mode (480 Mbps) of Universal Serial Bus
Specification
Revision 2.0
Connector type One receptacle (Type B)