Removing the door, Maintenance, Removing the door maintenance – GoPro Hero 5 Session User Manual
Page 35
68
69
In some situations, such as connecting the Karma drone (sold separately),
it might be more convenient to access the ports if the door is removed.
WARNING: Remove the door only when you are using the
camera in a dry, dust-free environment. When the door is open
or removed, the camera is not waterproof.
REMOVING THE SIDE DOOR
When removing the side door, be sure to pull it out in a straight motion, not
at an angle.
REATTACHING THE DOOR
REMOVING THE DOOR
MAINTENANCE
Follow these guidelines to get the best performance from your camera:
• The camera is waterproof to 33’ (10m)—no housing needed. Ensure
that the doors are closed before using the camera in or around water,
dirt, or sand.
• Before closing the doors, be sure the seals are free of debris. If needed,
clean with a cloth.
• Before opening the doors, be sure the camera is free of water or debris.
If needed, rinse the camera with fresh water and dry it with a cloth.
• If sand or debris hardens around the doors, soak the camera in warm
tap water for 15 minutes and then rinse thoroughly to remove the
debris before opening the doors.
• For best audio performance, shake the camera or blow on the mic
to remove water and debris from the microphone holes. To prevent
damage to the internal waterproof membranes, do not use compressed
air to blow into the mic holes.
• After every use in salt water, rinse the camera with fresh water, and dry
with a soft cloth.
• To clean the lens, wipe it with a soft, lint-free cloth. If debris becomes
lodged between the lens and the trim ring, flush it out with water or air.
Do not insert foreign objects around the lens.