Cleaning and maintenance, Troubleshooting – Powerplus POWXQG7510 LAWNMOWER 1800W 460MM EN User Manual
Page 11
POWXQG7510
EN
Copyright © 2014 VARO
P a g e
| 11
www.varo.com
12 CLEANING AND MAINTENANCE
Warning: Before performing any Maintenance or cleaning work, Always pull
out the mains plug!
Do not spray the unit with water. Ingress of water may destroy the Switch-plug combination
unit and the electric motor. Clean the unit with a cloth, hand brush, etc.
Expert inspection is required, do not make any adjustment by yourself, must contact to
customer Service centre:
If the lawn mower strikes an object.
If the motor stops suddenly
If the blade is bent (do not align!)
If the motor shaft is bent (do not align!)
If a short-circuit occurs when the cable is connected.
If the gears are damaged.
If the v-belt is defective.
13 TROUBLESHOOTING
FAULT
REMEDIAL ACTION
Motor does not
run
Check mains connection cable
Start on short grass or on an area which has already been mown.
Clean discharge channel/housing
–the mowing blade must rotate
freely
Correct the cutting height.
Motor power
drops
Correct the cutting height.
Clean discharge channel/housing
Have mowing blade resharpened /replaced -> customer Service
centre.
Grass catcher is
not filled
Correct the cutting height
Allow the lawn to dry
Have mowing blade resharpened /replaced -> customer Service
centre.
Clean the grille on the grass catcher
Clean the discharge channel /housing
Wheel drive does
not function
Adjust the flexible cable
Check the V-belt / gears ->customer Service centre.
Check the drive wheels for damage