Powerplus POWXQG7510 LAWNMOWER 1800W 460MM EN - Manual (Page 10)

POWXQG7510 EN
Copyright © 2014 VARO P a g e | 10 www.varo.com
9.2 Grass catcher (5)
There is a window on the rear cover. (Fig 8) You can see the condition of grass catcher
through the window. If the catcher is full of grass, you will empty and clean the bag, make sure
it is clean and ensure its meshwork is ventilated.
9.3 Height adjustment instructions (Fig 3)
CAUTION: Do not at any time make any adjustment to lawnmower without
first stopping the engine and waiting until cutting device has come to a
complete standstill.
CAUTION: before changing mowing height, stop mower and wait until
cutting device has come to a complete standstill.
Your mower is equipped with a central height adjustment lever offering 7 height positions.
 Stop mower and wait until cutting device has come to a complete standstill before
changing mower cutting height.
 The central height adjustment lever offers you 7 different height positions.
 To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down
to selected height.
 All wheels will be in the same height of cut.
10 BLADE
The blade is made of pressed steel. It will be necessary to reshape it frequently(with a grind
wheel).
Ensure that it is always balanced (an unbalanced blade will cause dangerous vibrations). To
check for balance, insert a round rod through the central hole and support the blade
horizontally. A balance blade will remain horizontal. If the blade is not balanced the heavy end
will rotate downwards. Reshape the heavy end until the blade is currently balanced. To
remove the blade, unscrew the blade screw.
Check the conditions of the fan, and replace any parts, which are damaged.
When reassembling, make sure that the cutting edges face in the direction of the motor
rotation. The blade screw must be torque to 25NM.
11 EXTENSION CORDS
You should only use extension cords for outdoor use, PVC ordinary duty with a cross sectional
area not less than 1.0mm².
Before using, check the supply and extension cords for signs of damaged during use,
disconnect the cord for signs of damage or aging. If the cord becomes damaged during use,
disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is damaged or worn.
Keep extension cord away from cutting elements.
Warning: Always ensure that the ventilation openings are kept clear of
debris.
We wish to thank you for choosing our products. We are confident that he high quality of our
machine will meet with your satisfaction and appreciation and that we will give you long-lasting
service.
Before starting to use your machine, make sure to read with care this manual, which has been
purposely drawn up to provide you with all the necessary information for proper use, in
compliance with basic safety requirements.