Powerplus POWX0682 DUAL SAW 1500W 160MM EN - Manual (Page 9)

POWX0682
EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
No
– load speed
4200 min
-1
Max. cutting depth 45mm
Saw blade diameter 160mm
Teeth 48T
Protection class Double insulated
Rated operation Continuous operation
11 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
98 dB(A)
Acoustic power level LwA 109 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) Max. 3.3 m/s² K = 1,5 m/s²
12 SERVICE DEPARTMENT
 Damaged switches must be replaced by a qualified technician.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
13 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.
14 TROUBLESHOOTING
Problem Cause Solution
Very high spark generation 1. Damaged teeth
2. Feed speed is too slow
3. Blunt teeth
1. Replace blades
2. Increase feed speed
3. Replace blades
A lot of wear in sections 1. Feed speed is too fast
2. Damaged teeth
3. Blunt teeth
4. Not cutting parallel or
perpendicular to work
surface
1. Reduce the feed speed
2. Replace blades
3. Hold saw parallel to
work surface
Blades are breaking 1. Damaged teeth
2. Feed speed is too fast
3. Blunt teeth
4. Blades have burned out
1. Replace blades
2. Reduce feed speed