Lubricant instructions – Powerplus POWX0682 DUAL SAW 1500W 160MM EN User Manual

Page 7

POWX0682

P a g e

| 7

www.varo.com

If the feed speed is too fast there is a definitive risk that the cut might split. The splinter will get
bigger and bigger and eventually break risking serious personal injury.
If the feed speed is too high there is risk that the cut might split and the splintering opening’s
volume will not be sufficient to divert all shaving. The result is poor cut with significant
discharge on the lower side of the material.

8.4

nstruction for cutting various cross sectional materials

Flat strip:
Move blades in a 90° angle across the piece.

Soft metals:
Apply lubrication sticks.

Square tube:
Move blades in diagonal.

U profile:
Move blades in diagonal.

Round tube:
Move blades through the piece making sure
they come out in a 90° angle.

Sheets::
Slide blades through the sheet.

8.5

Lubricant instructions

To become a longer blade life time, lubrication of the blades is necessary, especially when
cutting aluminium, copper, stainless steel and cast iron:
 Place the wax stick into the foreseen hole.