Powerplus POWX0550 CIRCULAR SAW 1800W 210MM EN - Manual (Page 8)

POWX0550
EN
Copyright © 2014 VARO P a g e | 8 www.varo.com
10 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
10.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2 Lubrication (fig. B)
From time to time, apply a drop of oil to the thread of the lock screw (17).
11 TECHNICAL DATA
Voltage / frequency 230-240V / 50Hz
Power input 1800 W
No load speed 5000 min
-1
Saw blade Ø 210 x Ø 30 x 2,4 mm
Max. depth of cut 90° 70 mm
Max. depth of cut 45° 45 mm
Mitre angle 0
– 45°
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
100 dB(A)
Acoustic power level LwA 107 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration) 3,9 m/s² K = 1,5 m/s²
13 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).