Powerplus POWX052 CIRCULAR SAW 1400W 185MM EN - Manual (Page 3)

POWX052
EN
Copyright © 2013 VARO P a g e | 3 www.varo.com
CIRCULAR SAW 1400W
POWX052
1 APPLICATION
Your circular saw has been designed for sawing wooden workpieces. The machine is only
suitable for right-hand use. The machine is not suitable for stationary use.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. On/off switch
2. Lock-off button
3. Dust extraction connector
4. Scale for saw blade depth
5. Adjusting screw for depth of cut
6. Guide handle
7. Scale for mitre angle
8. Adjusting screw for mitre angle
9. Shoe
10. Marking for bevel cuts
11. Marking for straight cuts
12. Adjusting screw for parallel fence
13. Laser on/off switch
14. Laser
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1pc two pin spanner
1pc spanner 1pc guide bar
1pc extra saw blade
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal injury or damage to the tool.
Always wear hearing protection Always wear safety goggles
Always wear protective gloves Always wear a dust mask.