Powerplus POWX0052 DRILL/SCREWDRIVER 14,4V 2BATT EN - Manual (Page 8)

POWX0052 EN
Copyright © 2015 VARO P a g e | 8 www.varo.com
9.4 On/off switch
 To switch on the tool, press the on/off switch
 To switch off the tool, release the on/off switch
9.5 Left/right switch
/ shown on the left/right switch
Set the Left/right switch to
Set the Left/right switch to
Change the direction of rotation only when the machine is not in operation !
Caution
Operating the machine with a low speed for a long time will increase the risk that the motor will
be overheated. To prevent overheating, let the motor cool down regularly ( Stop using the
machine for 15 minutes )
9.6 Variable speed
 Applying more pressure to the On/off switch will increase the speed.
 Applying less pressure to the On/off switch will decrease the speed.
9.7 Low/high Speed selection:
 Lower speed: switch Speed convert button to position 1.
 Higher speed: switch Speed convert button to position 2.
9.8 Torque setting
 The torque setting will help you regulate the driving power when using a screwdriver bit.
This will help to prevent damage to the workpiece and/or screw.
 For drilling set the torque selector to the position indicated by the drill bit symbol.
 Advice: Always start with the lowest torque setting ( 1 ) and increase if necessary.
10 TECHNICAL DATA
Modelnr. POWX0052
battery
voltage 14,4 V
type Ni-Cd
capacity 1300 mAh
qty 2
no load speed 0 -350/0-1250 min-1
Max. torque 26 Nm
charging time: 3 - 5 hours
Electronic overload protection no
chuck peacock" keyless chuck
Size 10 mm
LED light yes
motor 750 series
with brake yes
torque settings 16 + 1