Powerplus POWX0052 DRILL/SCREWDRIVER 14,4V 2BATT EN - Manual (Page 10)

POWX0052 EN
Copyright © 2015 VARO P a g e | 10 www.varo.com
 We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
 Your purchase receipt must be kept as proof of date of purchase.
 Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
13 CLEANING AND MAINTENANCE
attention! Before performing any work on the equipment, pull the power
plug.
13.1 Cleaning
 Keep the ventilation slots of the tool clean to prevent overheating of the engine.
 Regularly clean the tool housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
 Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
14 ENVIRONMENT
Should your machine need replacement after extended use, do not put it in the
domestic waste but dispose of it in an environmentally safe way.
Waste of electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
BATTERY PACK
This product contains Ni-CD. To preserve natural resources, please recycle or dispose of
batteries properly. Local, state or federal laws may prohibit disposal of Ni-CD batteries in
ordinary trash. Consult you local waste authority for information regarding available recycling
and/or disposal options.