Powerplus POW1820 MULTITOOL 135W EN - Manual (Page 5)

POW1820
EN
Copyright © 2014 VARO P a g e | 5 www.varo.com
 If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
 Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
 Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
 Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
 Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
 Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
 Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 SPECIFIC SAFETY WARNINGS
Do not use the tool on light metal with a magnesium content exceeding
80%, as this type of metal is flammable.
 Make sure that the accessories used are suitable for the maximum speed stated in the
technical data.
 Make sure that the accessories are mounted according to the instructions.
 Only use accessories and adapters supplied by the manufacturer.
 Make sure that sparks cannot hit any persons or set flammable materials alight.
 Always wear safety goggles, hearing protection and if necessary other protective means,
such as working gloves, hard hat, etc.
7 OPERATION
7.1 Mounting an accessory (fig. A & B)
 Keep the spindle lock button (4) depressed.
 Use the spanner (7) to slacken the collet nut (6).
 Insert the shaft of the accessory into the collet.
 Use the spanner to tighten the collet nut.
 Release the spindle lock button.