Powerplus POW1820 MULTITOOL 135W EN - Manual (Page 3)

POW1820
EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
MULTITOOL
POW1820
1 APPLICATION
Your multi tool has been designed for drilling, routing, engraving, polishing, cutting, grinding
and sanding of wood, metal, plastics and stone. It is not designed for commercial use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG A)
1. On/off switch
2. Speed adjusting wheel
3. Carbon brush holder
4. Spindle lock button
5. Collar
6. Collet nut
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 pc machine
1 pc flexible pipe
1 pc stand and clamp 40pcs accessories
1pc manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal injury
or damage to the tool.
Read manual before use
In accordance with essential
safety standards of applicable
European directives Class II - The machine is double
insulated;
Earthing wire is
therefore not necessary.
Mandatory use of eye
protection.
Wear a mask In dusty conditions
Wear noise protection