Powerplus POWXQ5220 HAMMER DRILL 520W EN - Manual (Page 8)

POWXQ5220 EN
Copyright © 2010 VARO P a g e | 8 www.varo.com
10 TECHNICAL DATA
Mains supply 230-240 V ~ 50 Hz
Rated input 520W
Impact rate Max. 3000min
-1
No load speed 820min
-1
Connection cable 4m
Weight ± 3.5 kg
11 SOUND EMISSION
Noise emission values measured according to relevant standard.
Acoustic pressure level LpA
94 dB(A) K = 3 dB(A)
Acoustic power level LwA 108 dB(A) K = 3 dB(A)
ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
aw (Vibration) 15.6 m/s² K = 1.5 m/s²
12 CLEANING AND MAINTENANCE
Before performing any work on the equipment, pull the power plug.
12.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.

If the dirt does not come off use a soft cloth moistened with soapy water.

Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach the inside of the power tool!
12.2 Lubrication
Unscrew the 4 screws to remove cap.
Put in some grease to lubricate.
Retighten the cap with the 4 screws.
12.3 Sharpening the Chiselling Tools
With sharpened chisels, you can achieve good working performance and long life service.
Therefore, sharpen the chisel regularly.
You can sharpen the chisel with a grinding wheel (e.g. alumina oxide) with constant water
supply.
13 WARRANTY

This product is warranted for a 5-year period effective from the date of purchase by the
first user.
 This warranty covers all material or production flaws. It does not include defective parts
subject to normal wear & tear such as bearings, brushes, cables, and plugs, or
accessories such as drills, drill bits, saw blades, etc.; damage or defects resulting from
maltreatment, accidents or alterations; nor the cost of transportation.