Powerplus POWXQ5220 HAMMER DRILL 520W EN - Manual (Page 3)

POWXQ5220 EN
Copyright © 2010 VARO P a g e | 3 www.varo.com
ROTARY HAMMER 520W
POWXQ5220
1 APPLICATION
The machine is intended for hammer drilling in concrete, brick and stone. It is likewise suitable
for drilling without impact in wood, metal, ceramic and plastic.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. SDS-plus chuck
2. Dust protection cap
3. Locking sleeve
4. Depth stop
5. Auxiliary handle
6. Unlocking button
7. Operational mode selection switch 1
8. Operational mode selection switch 2
9. On/Off switch
3 PACKAGE CONTENT LIST

Remove all packaging materials.

Remove remaining packing and package inserts (if included).

Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for
transportation damage.
 Keep the packing materials as far as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 x Rotary hammer 520W
1 x BMC
1 x Set of replacement carbon brushes
1 x Dust protection cap
1 x Metal depth stop
1 x Grease pot
1 x Auxiliary handle
SDS-plus drills 8/10/12x150mm
SDS-plus chisels 14x250mm
1 x flat
1 x point
1 x u
ser’s manual
1 x small XQ catalogue
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used: