Electrolux 1683-7 TK - Manual (Page 20)

20
Symptom
Unusual noises.
Possible Cause
Appliance is not level.
The appliance is touching
the wall or other objects.
Remedy
Readjust the feet.
Move the appliance
slightly.
The compressor does not
start immediately after
changing the temperature
setting.
This is normal, no error has
occurred.
Water on the floor or on
storage shelves. Water drain hole is
blocked. See the “Cleaning and
Care” section.
The compressor starts after
a period of time.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or disconnect from the
mains supply.
Light bulb data: 220-240 V, max. 15 W
To switch off, press the ON/OFF button “
” until the mains power
light extinguishes.
Unplug the mains plug.
To change the light bulb, undo the
screw.
Press the light bulb cover as shown and
slide it towards the rear of the appli-
ance.
☞
☞
☞
☞
Change the faulty light bulb.
Refit the light bulb cover and the screw.
Put the refrigerator back into operation.
☞
☞
☞