Electrolux 1683-7 TK - Manual (Page 13)

13
Temperature Display
The temperature display can indicate several pieces of
information:
• During normal operation, the temperature currently present in the
refrigerator or freezer compartment (ACTUAL temperature) is display-
ed, the corresponding light illuminates.
• When the temperature is being adjusted, the temperature currently
set flashes (DESIRED temperature).
°
C
+ 8 + 6 + 5 + 4 + 2
Starting up and temperature regulation
Insert the plug into the plug socket. When the refrigerator compart-
ment door is opened, the internal lighting is switched on.
Press ON/OFF button.
The green mains pilot indicator illuminates.
Press either the „+“ (WARMER) or „-“ (COLDER) button.
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
Set the required temperature by pressing the „+“ (WARMER) or „-“
(COLDER) buttons (see section "Temperature setting buttons"). The
temperature display will immediately show the changed setting. With
each further press of one of the two buttons, the DESIRED tempera-
ture is adjusted by one display field.
From a food safety point of view +5 °C should be considered suffi-
ciently cold for storing food in the fridge.
Once the required temperature has been set, after a short period
(approx. 5 sec.) the temperature display will change and again indicate
the current ACTUAL temperature inside the fridge. The display will
change from flashing to continuous illumination.
The compressor will start and then run automatically.
Information! When the setting is changed, the compressor does not
start immediately if automatic defrosting is currently taking place.
As the storage temperature within the fridge is reached quickly you
can store food immediately after switching on.
☞
☞
☞
☞
☞