Electrolux 1683-7 TK - Manual (Page 10)

Important
The wires in the mains lead are coloured
in accordance with the following code:
Green and Yellow: Earth
Blue:
Neutral
Brown: Live
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings identi-
fying the terminals in your plug, proceed
as follows:
07
GREEN & YELLOW
13 AMP. FUSE
BROWN
CORD CLAMP
BLUE
13 AMP
1.The wire coloured green and yellow must be connected to the termi-
nal marked with the letter “E” or by the earth symbol or coloured
green and yellow.
2.The wire coloured blue must be connected to the terminal “N” or
coloured black.
3.The wire coloured brown must be connected to the terminal marked
“L” or coloured red.
4.Upon completion there must be no cut, or stray strands of wire pre-
sent and the cord clamp must be secure over the outer sheath.
Warning! A cut-off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut-off plug is disposed of safe-
ly.
Plug socket
The plug socket necessary for connection of your appliance to the
electricity supply should be positioned so that it is possible to pull out
the appliance plug.
If your appliance is installed under a
continuous worktop, the plug socket
should be provided as shown.
Alternatively a concealed spur socket
fitted with a 13 A fuse may be fitted.
If the socket is not accessible once
the appliance is built in, the electrical
installation must include suitable
means of isolating the appliance from
the mains (e.g. fuse, cut-out, current
trip or similar with a minimum contact separation of 3 mm).
130
300
AEG44
10